We accept Visa, Mastercard, American Express, EFTPOS and Paypal.
Sort :
LD Systems Maui28 Column Array LD Systems Maui28 Column Array (LDMAUI28)

Price: $1,299.00

The LD MAUI 28 (Multiple Array User Intuitive) the perfect solution for musicians and DJs as well as presentations and events with sophisticated music playback. Because no cables and stands are required, this ?plug-and-play? system can be set up and taken down again very easily and quickly.

Frequency-response-based 4.1 five-way amping results in a clear, dynamic and balanced sound throughout the frequency range of this system. The array configuration ensures greater coverage with very well-balanced sound distribution even in the farthest corners of the venue.

The MAUI 28, which combines PA and monitoring system in one, guarantees the same sound experience for both audience and musician, easy transportation included. Just plug in your mixer and you are ready to go!

  • Power (RMS)- 400Watts
  • Frequency Response - 45Hz - 20kHz
  • Max SPL - 123dB
  • Inputs - 6.3 mm Jack, XLR, RCA
  • Outputs - XLR
  • Protection Circuits - Dual limiter
  • Column Dimensions (WxHxD) - 110 x 790 x 90mm
  • Sub Dimensions (WxHxD) - 390 x 450 x 510mm
  • Weight (system) - 35kg
  • Dual use as Front of house and fold-back
  • Amazing sound clarity and separation
  • 120° dispersion from column
  • 16 dedicated mid-high drivers
  • Packs down for easy transport and storage
  • Stylish minimalist design
  • Designed and engineered in Germany


LD Systems Maui5 Column Array LD Systems Maui5 Column Array (LDMAUI5)

Price: $799.00

The ultra compact MAUI 5 weighs in at about 11 kg while delivering 800 watts of peak power and a maximum SPL of 120 dB. Providing both sound reinforcement with extended coverage and feedback resistant monitoring the subwoofer base and 3-piece column system assembles in seconds with custom multi-pin connectors. The junior member of the MAUI family is most easily portable and fits onto any car seat.

The vented 8" subwoofer also houses the system's Class D amplification with overcurrent, short circuit and thermal protection, LD Systems' proprietary LECC digital processing and a 4-channel mixer. Featuring Bluetooth technology for wireless streaming and microphone, line level and hi-Z inputs which can be used simultaneously the MAUI 5 lets you connect a wide variety of sources including music players and instruments such as keyboards or guitars. Individual level controls, subwoofer and master volumes plus high shelf filtering for room correction enable a perfectly balanced performance.

  • Type: Column Array
  • Amplifier Type: Class-D
  • Power (Peak): 800Watts
  • Power (RMS): 200Watts
  • Frequency Response: 50Hz - 20kHz
  • Dispersion: 120° x 20°
  • Max SPL: 120dB
  • Inputs: RCA, XLR, 6.3 mm Jack
  • Protection Circuits: over-current, DSP-based multiband limiter, short circuit, thermal overload
  • Dimensions: 1985 x 305 x 395mm
  • Weight (system): 11.3kg
  • Dual use as Front of house and fold-back
  • 200W RMS power output
  • 8" sub for increased bottom end
  • Amazing sound clarity and separation
  • 120° dispersion from column
  • Bluetooth
  • 4 Channel Mixer
  • DSP-based signal processing
  • Packs down for easy transport and storage
  • Stylish minimalist design in a classy black colour scheme
  • Designed and engineered in Germany


Mackie SRM450 Powered Speaker Mackie SRM450 Powered Speaker (MACKIESRM450)

Price: $999.00

Live sound sometimes seems like a wild, uncaged animal—very hard to control. With the SRM Series Portable Active Loudspeakers, we came up with the technology to help tame the beast, so you could focus on your performance, instead of being distracted by constant EQ and level tweaks. Now, with the SRM450v2, live sound is whipped completely into submission, giving you more control over your shows than ever. Thanks to its all-new design—from adding new amps and transducers to a new lightweight power supply—the SRM450v2 surpasses the performance of the original SRM450 to deliver pure studio monitor sound at more powerful, full-on loudspeaker levels. We kept it affordable, too—even though the SRM450v2 is a complete redesign from inside out, we retained the musician-friendly price tag. With the SRM450v2, live never sounded so good …or behaved so well.

The “SRM” Stands for Sound Reinforcement Monitor

Over a decade ago, Greg Mackie and a dedicated team of engineers set out to create a portable loudspeaker that could deliver studio monitor sound quality. Unlike a relatively small, acoustically controlled studio where the “sweet spot” is well defined, live venues vary greatly, and most are far from acoustically balanced. Despite the challenges, after two years of extensive research and development, the first Sound Reinforcement Monitor was born—a loudspeaker that truly lived up to its name. The SRM450v2 continues the SRM450’s tradition of studio monitor sound quality—and trumps it—to deliver sound that makes any venue seem like a well-tuned studio.

For more details click here

  • 2-way bi-amplified, optimized Active loudspeaker system
  • High-output precision titanium compression driver
  • 12" lightweight long-throw low frequency transducer with 3-inch voice coil
  • Servo Feedback controlled woofer for tight low-end punch
  • 300W class-D, Fast Recovery LF amp / 100W HF amp
  • Ultra-wide, smooth dispersion via multi-cell horn aperture and HF waveguide
  • Built-in phase-accurate 24dB Linkwitz-Riley electronic crossover
  • Mackie Active Electronic time alignment, phase correction and EQ for studio quality sound
  • Mic/line input and pass-thru connector
  • Lightweight for ultimate portability (40lbs)
  • Flyable, Pole Mountable, Floor Wedge-able

Phonic Inception 500w rms 12" Speaker Phonic Inception 500w rms 12" Speaker (PHONICINCEPTION12A)

Price: $749.00

Phonic’s Inception powered speaker series establishes a new paradigm for live sound. Inception 12 and Inception 12 DSP’s 1100 Watt integrated power amps paired with custom transducers produce a shattering 131dB maximum sound pressure level (SPL). The Inception 18 Subwoofer provides an incredible 1200 Watt for a maximum SPL of 129 dB. The Inception 12 DSP’s 40-bit Theorem™ digital signal processor serves as a virtual “soundman” within each unit, offering an EQ function, feedback killer and a variable delay circuit. The unique internal voltage regulator provides complete protection against irregular power sources. With 1100 or 1200 Watts of ground shaking power, on-board mixers, custom tuned transducers and impact resistant polymer bodies, the Inception powered speakers leave few stones unturned. 

  • 550 Watt RMS/1100 Watt Peak bi-amplified system
  • Bi-amplified design with both D and AB class technology employed
  • 1.75’’ pure titanium compression tweeter reveals acoustic details beyond 20kHz
  • 12’’ long-throw composite woofer for exceptional low frequency extension
  • 131 dB maximum sound pressure level
  • Exceptionally flat frequency response between 45Hz and 20kHz
  • 75° conical dispersion
  • Three M-10 fly points for installation hanging
  • Industrial-grade 1.8mm grille
  • Enclosure: Impact resistant polymer shell
  • Vertical body curvature strengthens body structure and decreases diffraction effects
  • 45° floor monitor position when placed on side
  • Line-level XLR outputs for connecting additional amplifiers/speakers
  • 3 ergonomic metal handles
  • Remote gain
  • Timed turnoff

Phonic ISK10a 200w RMS Powered Speaker Phonic ISK10a 200w RMS Powered Speaker (PHONICISK10A)

Price: $549.00

With its signature vertical curvatures, thick foamed grille, and ergonomic metal handles, the studio-tuned iSK Active Deluxe loudspeaker establishes itself as the new segment benchmark. The iSK’s new 1’’ pure titanium compression tweeters gracefully extend beyond 22kHz. Paired with Phonic's proprietary Wing-Guide™ horn, the iSK achieves best-in-class dispersion of 70° x 70°. The iSK series is also equipped with a thick 1.3mm steel grille with acoustically-transparent foam. Engineered for an unsurpassed audio response, sensational power handling, and extensive mounting possibilities, the iSK establishes a new benchmark.


iSK 10A Deluxe

  • 800 Watt 10'' Active Loudspeaker

  • 400 Watt Music, 800 Watt Peak Power\

  • 10" woofer matched with 1" compression tweeter

  • New 1" pure titanium compression tweeter paired with Phonic’s proprietary Wing-Guide™ horn delivers smooth, transient highs beyond 22kHz

  • Power ratings certified and tested using the IEC 268 torture test

  • Thick 20mm Grade-MDF body with internal bracing system increases structural strength

  • New long-throw composite woofers offer among the lowest F0’s in market

  • XLR and 1/4" input connections, XLR output connectors

  • 2-way models serve as floor monitors when turned on side

  • Metal handles are exceptionally ergonomic and virtually indestructible

  • Wide 70° x 70° dispersion angle

  • Thick 1.3mm foamed grille